AI-generated illustration of two specification sheets, an empty measuring jug and a room thermometer in an autumn basement.

Why Does the UKOKE UDH0125 List Both 9 and 32 Pints per Day?

The two figures describe different conditions, not two different tank sizes. For the UKOKE UDH0125, the manual lists 9 pints per day at 65°F and 60% relative humidity, and 32 pints per day at 95°F and 90% relative humidity. When comparing equipment for a cool fall basement, keep each number attached to its conditions.

Read the complete rating, not just the headline

The current UKOKE UDH0125 product page presents both values. Its manual, printed page 13, gives the same pair. A statement such as “32 pints per day” loses essential meaning when temperature and humidity disappear from the comparison.

UDH0125 figures and what they describe
Figure Context Use it for
9 pints/day Manual: 65°F, 60% RH Comparison with equivalent rated conditions
32 pints/day Manual: 95°F, 90% RH Understanding the warmer, more humid condition
2 liters Removable water-tank volume Understanding the collection container

The manual describes specifications, not a measurement made in your basement. A room that changes through the day does not remain at a laboratory condition. Neither daily figure promises that you will empty that exact quantity every evening.

Check the independent model record

The ENERGY STAR record for UDH0125, unique ID 4478493, lists water-removal capacity of 9.0 pints per day and an Integrated Energy Factor of 1.92 liters per kilowatt-hour. The record captured September 28, 2026 identifies the UKOKE model by name and number.

Use that model identifier when checking another listing or document. A similar-looking cabinet, a retailer's category label or a rounded marketing headline is not a substitute for an exact model match. If a seller supplies a different figure, ask for its conditions and source before concluding that one appliance has greater capacity.

Efficiency and capacity answer different questions

Capacity describes water removal over a specified period and test condition. Integrated Energy Factor describes water removed relative to electricity used under its rating procedure. The ENERGY STAR guide explains the latter in liters per kilowatt-hour. You cannot read the efficiency value as tank volume or assume it predicts your monthly electricity bill.

Why autumn changes the comparison

ENERGY STAR's buying guidance recommends checking low-temperature suitability when a space falls below 65°F. It notes that frost on coils can reduce performance in cooler conditions. That is a reason to examine the intended room, not a reason to extrapolate a warm-condition maximum downward with an invented formula.

Before shopping, record the room temperature, measured humidity and when the space feels damp. Include the approximate area and whether water enters after rain. These observations describe the job the machine would face. A square-footage headline alone does not describe moisture load or the temperature where it must work.

Use a comparison sheet with matching columns

For each candidate, write the exact model, rated pints per day, associated conditions, efficiency metric and drainage options on one row. Leave a cell blank if its evidence is missing. A blank is more useful than putting a warmer-condition maximum beside another product's rated capacity and treating the larger number as an automatic winner.

Keep tank volume in a separate column. A larger collection bucket can change how often someone needs to empty it, but it does not establish how much moisture the compressor can remove. Likewise, a continuous drain changes where collected water goes; it does not create additional extraction capacity.

If you are evaluating an appliance you already own, keep room readings and the operating setup consistent when making observations. Water collected on two different days may reflect weather, airflow or moisture entering the room. Those notes can help support investigate performance, but they are not a controlled comparison between products.

What to ask before buying

Send the seller your room conditions and ask which stated capacity is relevant, what operating limits apply and whether the planned drainage arrangement is suitable. If those details remain unclear, postpone the purchase. Matching evidence to the room is more useful than choosing whichever listing displays the largest isolated number.

Written by Codex on September 28, 2026 using the linked sources. No firsthand product test or independent human review is claimed. Cover: AI-generated illustration, not an official product photograph or experimental evidence.

Back to blog